Refrigeration Systems for Project Engineers

We are a big part of your project that you don't have to think about

Design, on-site presence, knowledge of the latest innovations: given all the responsibilities they bear towards the end user, engineering consultants are very pleased to find a single point of contact to whom they can delegate a vertical section of work such as industrial refrigeration systems. Here you will find our guarantees of reliability: put us to the test.

A single interlocutor.

A single interlocutor. Your partner throughout the project and installation, whether for individual solutions or turnkey refrigeration systems.

Experience throughout the process.

Experience throughout the process. Knowledge of the refrigeration system and its interaction with the production plant is our responsibility.

Selected internal components.

Selected internal components. Evaluation through unified programmes to have immediate visibility of their interaction in the design phase.

Guaranteed performance.

Guaranteed performance. Regular testing and acceptance of all installed solutions.

Installation support.

Installation support. We minimise your worries through an on-site presence during critical phases.

Full technical information.

Full technical information. Process knowledge, operator training, smooth handover after installation.

Refrigeration consultants... for industry consultants

Engineering firms understand more than anyone else the burden of offering the end customer an integrated solution: it is a matter of taking charge of the entire project requirements, including design, machinery (such as refrigeration systems), and services related to the order. This is a very broad responsibility, which refrigeration engineers must handle themselves. Unless they, in turn, have reliable consultants.

We well understand the need for firms to be able to delegate specific and vertical sections of the plant design, in their technical components and interactions with other units.

  • Our refrigeration and cooling plant project starts with the first exchange of information, passes through the unified choice of components using the best software on the market, and ends with a thorough testing and acceptance phase. Naturally, we know the questions to ask first.
  • We are present during the installation phase, reducing the unknowns of this phase and managing any critical issues.
  • We take care of a simple and complete handover to the operators of the installation. We then provide future availability to your customer in terms of F-Gas control and periodic maintenance services.
Tell us your needs
Refrigeration Solutions for Project Engineers

Turnkey refrigeration systems: an additional guarantee for you

A particularly significant case of this ‘presence in all project phases’ are turnkey refrigeration plants. Many times, in fact, a typical order in industrial refrigeration does not end with a single unit. Often the customer’s explicit or implicit request is for several machines and services. For example:

  • chillers,
  • one or more auxiliary cooling units and heat exchangers,
  • control panels, pump systems, hydraulic connections and automation,
  • modular process skids (for containing one or more parts),
  • design, handling, installation services.

Demand of this kind is best handled if the engineering firm’s supplier can, in turn, rely on a very wide range of cold solutions and selected partners on secondary sub-supplies. For an engineering firm, being able to interface uniquely with those who carry out this systems integration work is a not inconsiderable comfort.

Certified innovation, guaranteed reliability for consultants and customers

Many consultants in design offices have a focus and sensitivity for product innovations: this gives them the guarantee and security of giving their customers the best on the market.

We know that, in addition to a careful selection of components, the state of the art in industrial solutions today is automation in an Industry 4.0 perspective: the ability to remotely manage chillers and coolers, and possibly predict maintenance needs, are benefits to which all sectors are turning their attention. This is why all Frigofluid systems have Industry 4.0 Certification, an additional guarantee to provide to designers.

Ask for information


Impianto di Refrigerazione Chiavi in Mano

Turnkey Industrial Refrigeration Plants

A refrigeration system is more than a single chiller: heat exchangers, hydraulic connections, additional cooling devices also come into play to support your production process.

RW ax Chiller industriale
For fluid outlet temperatures between 1°C and 20°C
-20 -10 0 10 20 30 40 50

RW ax Liquid Chiller

These liquid chillers combine efficiency and performance control with brushless axial fans: they are chillers suitable for achieving average fluid outlet temperatures while optimizing energy use. In standard execution, ambient temperatures up to +40°C are allowed, but set-ups for even higher ambient temperatures can be requested.

RW ax LT Chiller per Basse Temperature
For fluid outlet temperatures between -8°C and 5°C
-20 -10 0 10 20 30 40 50

RW ax LT Liquid Chiller

Low outlet fluid temperatures (water or water and glycol, down to -8°C) characterize RW ax LT liquid chillers: air condensation ensures that they use are electrical energy, and not water, for their operation: a resource that is then optimized by the electronically controlled “brushless” type axial fans. Up to +40°C ambient temperature allowed in standard execution.

RW EFC ax Chiller con Free Cooling
For fluid outlet temperatures between 10°C and 25°C
-20 -10 0 10 20 30 40 50

RW / EFC ax Liquid Chiller

The secret of this system is the combination of the refrigeration section and the free-cooling section depending on the time of day and year: the first mode allowed by these liquid chillers takes advantage of the normal operation of a refrigeration circuit, the second allows cold outside air to be directly conveyed to the fluid to be cooled: maximum efficiency, minimum energy use due to the clear separation between the two sections.

ERW Chiller Industriale
For fluid outlet temperatures between -12°C and 30°C
-20 -10 0 10 20 30 40 50

ERW ax Liquid Chillers

These liquid chillers are also suitable for working outdoors and in very high outside temperatures. Depending on the agreed design features, fluid outlet temperatures from -12°C to +30°C can be achieved: adaptability and reliability for all industrial plants.

RW CW Chiller Condensato ad Acqua
For fluid outlet temperatures between -8°C and 20°C
-20 -10 0 10 20 30 40 50

RW CW Liquid Chiller

The RW CW line was developed to serve production islands where air movement is not permitted. Electronic control also allows the energy used by these liquid chillers to be optimised. Low temperatures, efficiency, protection from external agents.

RAW-E Dry Cooler
For fluid outlet temperatures between -10°C and 50°C
-20 -10 0 10 20 30 40 50

RAW/E Industrial Liquid Cooler

How to cool process fluids in the total absence of water? By employing industrial air coolers, or “dry coolers,” such as Frigofluid’s RAW/E series: simple, environmentally friendly, low acquisition cost.

PAD-V Dry Cooler Adiabatico
For fluid outlet temperatures between 35°C and 50°C
-20 -10 0 10 20 30 40 50

PAD-V Adiabatic Cooler Condenser

Adiabatic liquid coolers and gas condensers PAD-V series are offered where the focus is particularly on rational use of water and energy thanks to a dual operating principle, during hot and cold seasons, and thanks to the control panel that optimizes system operating parameters.

FT Centralina di Termoregolazione
For fluid outlet temperatures up to 110°C
70 80 90 100 110 120 130 140

FT Water Thermoregulator

FT water temperature controllers make it possible not only to heat process water for molds, but also to stabilize the fluid for a long time at the desired temperature. Models available with oversized pump, suitable for high pressures.

FTT DC Termoregolatore con Auto-Tuning
For fluid outlet temperatures up to 140°C
70 80 90 100 110 120 130 140

FTT DC Water Thermoregulator

High temperatures, kept stable over time: FTT DC water temperature controllers take advantage of the principle of direct cooling by integrating with external water sources for long self-stabilization to benefit industrial processes. All with great ease of use, thanks to the touch-screen control panel.

FTT Termoregolatore industriale
For fluid outlet temperatures up to 90°C
70 80 90 100 110 120 130 140

FTT PD Water Thermoregulator

Pressure and vacuum working modes: this is the main feature of FTT PD water temperature controllers, especially useful for coping with some critical issues in production processes. The touch-screen panel also makes them very easy to operate.

Refrigeratori Rigenerati

Remanufactured chillers for immediate delivery

Remanufacturing is a 'hot topic' in industrial production, especially in times of resource rationalisation: Frigofluid can supply its customers with remanufactured chillers. A totally sustainable solution.

Some Frigofluid projects

Do you already know your plant engineering requirements?

Tools to help you choose

Preliminary Assessment

Many interlocutors come to us with a very general idea of their industrial refrigeration needs: this is normal. That's why we stimulate the sharing of technical information.

Customized Design

We believe that integration with the best accessories on the market and the careful and 'unified' selection of internal components can make the difference.

Custom Chillers and Turnkey Plants

Production facilities and the characteristic of the installation area also have important effects on the design: because one cannot stop at the listed solutions.